MK30DN512ZVLK10 Freescale Semiconductor, MK30DN512ZVLK10 Datasheet - Page 592

• Manufacturer Part Number: MK30DN512ZVLK10
• Description: ARM Microcontrollers - MCU KINETIS 512K SLCD
• Manufacturer: Freescale Semiconductor

Specifications of MK30DN512ZVLK10

• Core: ARM Cortex M4
• Processor Series: K30
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 512 KB
• Data Ram Size: 128 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.71 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Package / Case: LQFP-80
• Mounting Style: SMD/SMT

External Signal Description
IFR — Nonvolatile information register found in each flash block, separate from the
main memory array.
NVM — Nonvolatile memory. A memory technology that maintains stored data during
power-off. The flash array is an NVM using NOR-type flash memory technology.
NVM Normal Mode — An NVM mode that provides basic user access to FTFL
resources. The CPU or other bus masters initiate flash program and erase operations (or
other FTFL commands) using writes to the FCCOB register group in the FTFL module.
NVM Special Mode — An NVM mode enabling external, off-chip access to the memory
resources in the FTFL module. A reduced FTFL command set is available when the
MCU is secured. See the Chip Configuration details for information on when this mode is
used.
Phrase — 64 bits of data with an aligned phrase having byte-address[2:0] = 000.
Longword — 32 bits of data with an aligned longword having byte-address[1:0] = 00.
Word — 16 bits of data with an aligned word having byte-address[0] = 0.
Program flash — The program flash memory provides nonvolatile storage for vectors
and code store.
Program flash Sector — The smallest portion of the program flash memory
(consecutive addresses) that can be erased.
Retention — The length of time that data can be kept in the NVM without experiencing
errors upon readout. Since erased (1) states are subject to degradation just like
programmed (0) states, the data retention limit may be reached from the last erase
operation (not from the programming time).
RWW— Read-While-Write. The ability to simultaneously read from one memory
resource while commanded operations are active in another memory resource.
Section Program Buffer — Lower half of the programming acceleration RAM allocated
for storing large amounts of data for programming via the Program Section command.
Secure — An MCU state conveyed to the FTFL module as described in the Chip
Configuration details for this device. In the secure state, reading and changing NVM
contents is restricted.
28.2 External Signal Description
The FTFL module contains no signals that connect off-chip.
K30 Sub-Family Reference Manual, Rev. 6, Nov 2011
592
Freescale Semiconductor, Inc.