M30245FCGP#U1 Renesas Electronics America, M30245FCGP#U1 Datasheet - Page 174

• Manufacturer Part Number: M30245FCGP#U1
• Description: IC M16C/24 MCU FLSH 128K 100LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/20r

Specifications of M30245FCGP#U1

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: I²C, SPI, SSI, UART/USART, USB
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 82
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Package: 100LQFP
• Family Name: R8C
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 82
• Interface Type: USB/UART/I2C/SPI
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M30245 Group
Table 1.58. Repeat mode specifications
Rev.2.00
REJ03B0005-0200
Table 1.57. One-shot mode specifications
Function
Start condition
Stop condition
Interrupt request
generation timing
Input pin
A/D converter results
Function
Start condition
Stop condition
Interrupt request
generation timing
Input pin
A/D converter results
One-shot mode
Repeat mode
In one-shot mode, the pin selected using the analog input pin select bit is used for one-shot A/D conversion. Table
1.57 shows the specifications of one-shot mode.
In repeat mode, the pin selected using the analog input pin select bit is used for repeated A/D conversion. Table
1.58 shows the specifications of repeat mode.
Oct 16, 2006
Item
Item
page 172 of 264
The pin selected by the analog input pin select bit is used for one A/D conversion.
Writing "1" to A/D conversion start flag, external trigger.
ger is selected)
End of A/D conversion.
One of AN
Read AD register corresponding to selected pin.
The pin selected by the analog input pin select bit is used for repeated A/D conversion.
Writing "1" to A/D conversion start flag, external trigger.
Writing "0" to A/D conversion start flag.
None generated.
One of AN
Read AD register corresponding to selected pin (at any time).
End of A/D conversion (A/D conversion start flag changes to "0" except when external trig-
Writing "0" to A/D conversion start flag.
0
0
to AN
to AN
7
7
, as selected.
, as selected.
Specification
Specification
A/D converter