M30245FCGP#U1 Renesas Electronics America, M30245FCGP#U1 Datasheet - Page 175

• Manufacturer Part Number: M30245FCGP#U1
• Description: IC M16C/24 MCU FLSH 128K 100LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/20r

Specifications of M30245FCGP#U1

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: I²C, SPI, SSI, UART/USART, USB
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 82
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Package: 100LQFP
• Family Name: R8C
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 82
• Interface Type: USB/UART/I2C/SPI
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M30245 Group
Table 1.59. Single sweep mode specifications
Table 1.60. Repeat sweep 0 specifications
Rev.2.00
REJ03B0005-0200
Function
Start condition
Stop condition
Interrupt request
generation timing
Input pin
A/D converter results
Function
Start condition
Stop condition
Interrupt request
generation timing
Input pin
A/D converter results
Single sweep mode
Repeat sweep mode 0
In single sweep mode, the pins selected using the A/D sweep pin select bit are used for one-by-one A/D conversion.
Table 1.59 shows the specifications of single sweep mode.
In repeat sweep mode 0, the pins selected using the A/D sweep pin select bit are used for repeat sweep A/D
conversion. Table 1.60 shows the specifications of repeat sweep mode 0.
Oct 16, 2006
Item
Item
page 173 of 264
Writing "1" to A/D converter start flag, external trigger.
The pins selected by the A/D sweep pin select bit are used for one-by-one A/D conversion.
ger is selected).
End of Sweep.
AN
Read AD register corresponding to selected pin.
The pins selected by the A/D sweep pin select bit are used for repeat sweep A/D conversion.
Writing "1" to A/D conversion start flag.
Writing "0" to A/D conversion start flag.
None generated.
AN
Read AD register corresponding to selected pin (at any time).
End of A/D conversion (A/D conversion start flag changes to "0" except when external trig-
Writing "0" to A/D conversion start flag.
0
0
and AN
and AN
1
1
(2 pins), AN
(2 pins), AN
0
0
to AN
to AN
3
3
(4 pins), AN
(4 pins), AN
Specification
Specification
0
0
to AN
to AN
5
5
(6 pins), or AN
(6 pins), or AN
0
0
to AN
to AN
A/D converter
7
7
(8 pins).
(8 pins).