ATXMEGA256A3B-MH Atmel, ATXMEGA256A3B-MH Datasheet - Page 155

• Manufacturer Part Number: ATXMEGA256A3B-MH
• Description: MCU AVR 256KB FLASH A3B 64-QFN
• Manufacturer: Atmel
• Series: AVR® XMEGAr

Specifications of ATXMEGA256A3B-MH

• Core Processor: AVR
• Core Size: 8/16-Bit
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 256KB (128K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 3.6 V
• Data Converters: A/D 16x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-MLF®, 64-QFN
• Processor Series: ATXMEGA256x
• Core: AVR8
• Data Bus Width: 8 bit, 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 49
• Number Of Timers: 7
• Operating Supply Voltage: 1.6 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 8 Channel
• On-chip Dac: 12 bit, 2 Channel
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ATXMEGA256A3B-MU; ATXMEGA256A3B-MU

14.6.1
14.6.2
14.6.3
14.6.4
8077H–AVR–12/09
Normal Operation
Event Action Controlled Operation
32-bit Operation
Changing the Period
In Normal Operation the Counter will count in the direction set by the Direction (DIR) bit for each
clock until it reaches TOP or BOTTOM. When TOP is reached when up-counting, the counter
will be set to zero when the next clock is given. When down-counting the Counter is reloaded
with Period Register value when BOTTOM is reached.
Figure 14-6. Normal Mode of Operation
As shown in
write access has higher priority than count, clear, or reload and will be immediate. The direction
of the Counter can also be changed during normal operation.
Normal operation must be used when using the counter as timer base for the capture channels.
The Event Selection and Event Action settings can be used to control the Counter from the
Event System. For the Counter the event actions can be selected to:
Two Timer/Counters can be used together to enable 32-bit counter operation. By using two
Timer/Counters the overflow event from one Timer/Counter (least significant timer) can be
routed via the Event System and used as clock input for another Timer/Counter (most significant
timer).
The Counter period is changed by writing a new TOP value to the Period Register. If double
buffering is not used, any period update is immediate as shown in
• Event system controlled Up/Down counting.
• Event system controlled Quadrature Decode counting.
CNT
DIR
MAX
Figure 14-6
TOP
BOT
changing the counter value while the counter is running is possible. The
CNT written
Figure 14-7 on page
XMEGA A
"update"
156.
155