ATXMEGA256A3B-MH Atmel, ATXMEGA256A3B-MH Datasheet - Page 164

• Manufacturer Part Number: ATXMEGA256A3B-MH
• Description: MCU AVR 256KB FLASH A3B 64-QFN
• Manufacturer: Atmel
• Series: AVR® XMEGAr

Specifications of ATXMEGA256A3B-MH

• Core Processor: AVR
• Core Size: 8/16-Bit
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 256KB (128K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 3.6 V
• Data Converters: A/D 16x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-MLF®, 64-QFN
• Processor Series: ATXMEGA256x
• Core: AVR8
• Data Bus Width: 8 bit, 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 49
• Number Of Timers: 7
• Operating Supply Voltage: 1.6 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 8 Channel
• On-chip Dac: 12 bit, 2 Channel
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ATXMEGA256A3B-MU; ATXMEGA256A3B-MU

14.10 DMA Support.
14.11 Timer/Counter Commands
8077H–AVR–12/09
The interrupt flags can be used to trigger DMA transactions.
transfer triggers available from the T/C, and the DMA action that will clear the transfer trigger.
For more details on using DMA refer to
Table 14-2.
A set of commands can be given to the Timer/Counter by software to immediately change the
state of the module. These commands give direct control of the Update, Restart, and Reset
signals.
An update command has the same effect as when an update condition occurs. The update com-
mand is ignored if the Lock Update bit is set.
The software can force a restart of the current waveform period by issuing a restart command. In
this case the Counter, direction, and all compare outputs are set to zero.
A reset command will set all Timer/Counter registers to their initial values. A reset can only be
given when the Timer/Counter is not running (OFF).
Request
OV/UNFIF
ERRIF
CCxIF
DMA Request Sources
Acknowledge
DMA Controller writes to CNT
DMA Controller writes to PER
DMA Controller writes to PERBUF
N/A
DMA Controller access of CCx
DMA Controller access of CCxBUF
”DMA - Direct Memory Access Controller” on page
Table 14-2 on page 164
Comment
Input Capture operation
Output Compare operation
XMEGA A
lists the
49.
164