ATXMEGA256A3B-MH Atmel, ATXMEGA256A3B-MH Datasheet - Page 363

MCU AVR 256KB FLASH A3B 64-QFN

ATXMEGA256A3B-MH

Manufacturer Part Number
ATXMEGA256A3B-MH
Description
MCU AVR 256KB FLASH A3B 64-QFN
Manufacturer
Atmel
Series
AVR® XMEGAr
Datasheets

Specifications of ATXMEGA256A3B-MH

Core Processor
AVR
Core Size
8/16-Bit
Speed
32MHz
Connectivity
I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number Of I /o
49
Program Memory Size
256KB (128K x 16)
Program Memory Type
FLASH
Eeprom Size
4K x 8
Ram Size
16K x 8
Voltage - Supply (vcc/vdd)
1.6 V ~ 3.6 V
Data Converters
A/D 16x12b; D/A 2x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-MLF®, 64-QFN
Processor Series
ATXMEGA256x
Core
AVR8
Data Bus Width
8 bit, 16 bit
Data Ram Size
16 KB
Interface Type
I2C, SPI, USART
Maximum Clock Frequency
32 MHz
Number Of Programmable I/os
49
Number Of Timers
7
Operating Supply Voltage
1.6 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
EWAVR, EWAVR-BL
Development Tools By Supplier
ATAVRDRAGON, ATAVRISP2, ATAVRONEKIT
Minimum Operating Temperature
- 40 C
On-chip Adc
12 bit, 8 Channel
On-chip Dac
12 bit, 2 Channel
For Use With
ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPI
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
ATXMEGA256A3B-MU
ATXMEGA256A3B-MU

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ATXMEGA256A3B-MH
Manufacturer:
ATMEL/爱特梅尔
Quantity:
20 000
30.3
30.4
30.4.1
30.4.2
30.4.3
30.4.4
30.5
8077H–AVR–12/09
NVM Controller
NVM Commands
NVM Controller Busy
Action Triggered Commands
NVM Read Triggered commands
NVM Write Triggered Commands
CCP Write/Execute Protection
For both self-programming and external programming it is possible to run an automatic CRC
check on the Flash or a section of the Flash to verify its content.
The device can be locked to prevent read and/or write of the NVM. There are separate lock bits
for external programming access, and self-programming access to the Boot Loader Section,
Application Section and Application Table Section.
All access to the Non Volatile Memories is done through the NVM Controller. This controls all
NVM timing and access privileges, and hold the status of the NVM. This is the common NVM
interface for both the external programming and self-programming. For more details on the NVM
Controller refer to
The NVM Controller has a set of commands that decide the task to perform on the NVM. This is
issued to the NVM Controller by writing the selected command to the NVM Command Register.
In addition data and addresses must be read/written from/to the NVM Data and Address regis-
ters for memory read/write operations.
When a selected command is loaded and address and data is setup for the operation, each
command has a trigger that will start the operation. Bases on the triggers, there are three main
types of commands.
Action triggered commands are triggered when the Command Execute (CMDEX) bit in the NVM
Control Register A (CTRLA) is written. Action triggered commands typically are used for opera-
tions which do not read or write the NVM such as the CRC check.
NVM read triggered commands are triggered when the NVM memory is read, and this is typically
used for NVM read operations.
NVM Write Triggered commands are triggered when the NVN is written, and this is typically
used for NVM write operations.
Most command triggers are protected from accidental modification/execution during self-pro-
gramming. This is done using the Configuration Change Protection (CCP) feature which
requires a special write or execute sequence in order to change a bit or execute an instruction.
For details on the CCP, refer to
When the NVM Controller is busy performing an operation, the Busy flag in the NVM Status
Register is set and the following registers are blocked for write access:
• NVM Command Register
• NVM Control A Register
• NVM Control B Register
• NVM Address registers
”Register Description” on page
”Configuration Change Protection” on page 12
385.
XMEGA A
363

Related parts for ATXMEGA256A3B-MH