D12674RVFQ33D Renesas Electronics America, D12674RVFQ33D Datasheet - Page 252

• Manufacturer Part Number: D12674RVFQ33D
• Description: MCU 3V 0K I-TEMP 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of D12674RVFQ33D

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412674RVFQ33D; HD6412674RVFQ33D

Section 6 Bus Controller (BSC)
6.7.3
If the ABW2 bit in ABWCR corresponding to an area designated as continuous synchronous
DRAM space is set to 1, area 2 to 5 are designated as 8-bit continuous synchronous DRAM space;
if the bit is cleared to 0, the areas are designated as 16-bit continuous synchronous DRAM space.
In 16-bit continuous synchronous DRAM space, 16-bit configuration synchronous DRAM can be
connected directly.
In 8-bit continuous synchronous DRAM space the upper half of the data bus, D15 to D8, is
enabled, while in 16-bit continuous synchronous DRAM space both the upper and lower halves of
the data bus, D15 to D0, are enabled.
Access sizes and data alignment are the same as for the basic bus interface: see section 6.5.1, Data
Size and Data Alignment.
6.7.4
Table 6.9 shows pins used for the synchronous DRAM interface and their functions. To enable the
synchronous DRAM interface, fix the DCTL pin to 1. Do not vary the DCTL pin during operation.
Since the CS2 to CS4 pins are in the input state after a reset, set DDR to 1 when RAS, CAS, and
WE signals are output. For details, see section 10, I/O Ports. Set the OEE bit of the DRAMCR
register to 1 when the CKE signal is output.
Rev. 3.00 Mar 17, 2006 page 200 of 926
REJ09B0283-0300
Data Bus
Pins Used for Synchronous DRAM Interface