D12674RVFQ33D Renesas Electronics America, D12674RVFQ33D Datasheet - Page 350

• Manufacturer Part Number: D12674RVFQ33D
• Description: MCU 3V 0K I-TEMP 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of D12674RVFQ33D

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Other names: HD6412674RVFQ33D; HD6412674RVFQ33D

Section 7 DMA Controller (DMAC)
7.5.5
Single address mode can only be specified for channel B. This mode can be specified by setting
the SAE bit in DMABCRH to 1 in short address mode.
One address is specified by MAR, and the other is set automatically to the data transfer
acknowledge pin (DACK). The transfer direction can be specified by the DTDIR bit in DMACR.
Table 7.8 summarizes register functions in single address mode.
Table 7.8
Register
23
MAR specifies the start address of the transfer source or transfer destination as 24 bits. IOAR is
invalid; in its place the strobe for external devices (DACK) is output.
Figure 7.9 illustrates operation in single address mode (when sequential mode is specified).
Rev. 3.00 Mar 17, 2006 page 298 of 926
REJ09B0283-0300
15
Single Address Mode
DACK pin
MAR
Register Functions in Single Address Mode
ETCR
0
0
DTDIR = 0 DTDIR = 1 Initial Setting
Source
address
register
Write
strobe
Transfer counter
Function
Destination
address
register
Read
strobe
Start address of
transfer destination
or transfer source
(Set automatically
by SAE bit; IOAR
is invalid)
Number of transfers See sections
Operation
See sections
7.5.2, Sequential
Mode, 7.5.3, Idle
Mode, and 7.5.4,
Repeat Mode.
Strobe for
external device
7.5.2, Sequential
Mode, 7.5.3, Idle
Mode, and 7.5.4,
Repeat Mode.