HD64F3029XBL25V Renesas Electronics America, HD64F3029XBL25V Datasheet - Page 597

• Manufacturer Part Number: HD64F3029XBL25V
• Description: MCU 5V 512K,PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3029XBL25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Bit 7—D/A Output Enable 1 (DAOE1): Controls D/A conversion and analog output.
1
Bit 6—D/A Output Enable 0 (DAOE0): Controls D/A conversion and analog output.
1
Bit 5—D/A Enable (DAE): Controls D/A conversion, together with bits DAOE0 and DAOE1.
When the DAE bit is cleared to 0, analog conversion is controlled independently in channels 0
and 1. When the DAE bit is set to 1, analog conversion is controlled together in channels 0 and 1.
Output of the conversion results is always controlled independently by DAOE0 and DAOE1.
1
When the DAE bit is set to 1, even if bits DAOE0 and DAOE1 in DACR and the ADST bit in
ADCSR are cleared to 0, the same current is drawn from the analog power supply as during A/D
and D/A conversion.
Bits 4 to 0—Reserved: These bits cannot be modified and are always read as 1.
Rev. 2.0, 06/04, page 568 of 980
Bit 7
DAOE1
0
Bit 6
DAOE0
0
Bit 7
DAOE1
0
1
0
1
Bit 6
DAOE0
0
Channel-1 D/A conversion and DA
Channel-0 D/A conversion and DA
Description
DA
Description
DA
1
0
analog output is disabled
analog output is disabled
0
1
0
1
—
Bit 5
DAE
—
D/A conversion is enabled in channel 0
D/A conversion is disabled in channel 1
D/A conversion is enabled in channels 0 and 1
D/A conversion is disabled in channel 0
D/A conversion is enabled in channel 1
D/A conversion is enabled in channels 0 and 1
D/A conversion is enabled in channels 0 and 1
Description
D/A conversion is disabled in channels 0 and 1
1
0
analog output are enabled
analog output are enabled