HD64F3029XBL25V Renesas Electronics America, HD64F3029XBL25V Datasheet - Page 681

• Manufacturer Part Number: HD64F3029XBL25V
• Description: MCU 5V 512K,PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3029XBL25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Response
Error
response
(3) Clock Mode Inquiry
The boot program will return the supported clock modes in response to the clock mode inquiry.
Command H'21
Response
(4) Clock Mode Selection
The boot program will set the specified clock mode. The program will return the selected clock-
mode information after this setting has been made.
The clock-mode selection command should be sent after the device-selection commands.
Command H'11
Rev. 2.0, 06/04, page 652 of 980
Size (1 byte) : Amount of device-code data
This is fixed to 4
Device code (4 bytes) : Device code returned in response to the supported device inquiry
(ASCII-code)
SUM (1 byte) : Checksum
Response, H'06, (1 byte) : Response to the device selection command
ACK will be returned when the device code matches.
Error response, H'90, (1 byte) : Error response to the device selection command
Error : (1 byte) : Error code
Command, H'21, (1 byte) : Inquiry regarding clock mode
Response, H'31, (1 byte) : Response to the clock-mode inquiry
Size (1 byte) : Amount of data that represents the number of modes and modes
A number of clock modes (1 byte) : The number of supported clock modes
H'00 indicates no clock mode or the device allows to read the clock mode.
Mode (1 byte) : Values of the supported clock modes (i.e. H'01 means clock mode 1.)
SUM (1 byte) : Checksum
Command, H'11, (1 byte) : Selection of clock mode
Size (1 byte) : Amount of data that represents the modes
H'06
H'90
H'31
H'11 : Sum check error
H'21 : Device code error, that is, the device code does not match
ERROR
Size
Size
A number of
Mode
modes
SUM
Mode
SUM