R88M-WP10030S-BWS1 Omron, R88M-WP10030S-BWS1 Datasheet - Page 202

• Manufacturer Part Number: R88M-WP10030S-BWS1
• Description: SERVO MOTOR 100W 100V W/BRAKE
• Manufacturer: Omron

Specifications of R88M-WP10030S-BWS1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MWP10030SBWS1

System Design and Installation
The standard cable conforms to IP30. When selecting an IP67-rated Servomotor for use in a wet envi-
ronment, install waterproof connectors for the power and Encoder Cables. The recommended connec-
tors are the same as for the EC Directives, listed in the tables above.
H Oil Seals
H Other Precautions
3-8
• Do not apply commercial power directly to the Servomotor. The Servomotors run on synchronous
• Take measures to prevent the shaft from rusting. The shafts are coated with anti-rust oil when
• Absolutely do not remove the encoder cover or take the motor apart. The magnet and the encoder
If the Servomotor is to be used in a location where it may be exposed to oil or grease, select an
IP67-rated Servomotor or a Servomotor with an oil seal.
AC and use permanent magnets. Applying commercial power directly will burn out the motor coils.
shipped, but anti-rust oil or grease should also be applied when connecting the shaft to a load.
are aligned in the AC Servomotor. If they become misaligned, the motor will not operate.
3,000-r/min Servomotors (1 to 5 kW): IP67 (except for through-shaft parts). Models are also avail-
able with IP67 ratings that include through-shaft parts.
3,000-r/min Flat-style Servomotors (100 W to 1.5 kW): IP55 (except for through-shaft parts). Mod-
els are also available with IP67 ratings that include through-shaft parts.
1,000-r/min Servomotors (300 W to 5.5 kW): IP67 (except for through-shaft parts). Models are also
available with IP67 ratings that include through-shaft parts.
1,500-r/min Servomotors (450 W to 15 kW): IP67 (except for through-shaft parts). Models are also
available with IP67 ratings that include through-shaft parts.
Chapter 3