R88M-WP10030S-BWS1 Omron, R88M-WP10030S-BWS1 Datasheet - Page 412

• Manufacturer Part Number: R88M-WP10030S-BWS1
• Description: SERVO MOTOR 100W 100V W/BRAKE
• Manufacturer: Omron

Specifications of R88M-WP10030S-BWS1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MWP10030SBWS1

Troubleshooting
5-4
Overload characteristics are shown in the following table. If, for example, a current of three times the
Servomotor’s rated current flows continuously, it will be detected after approximately three seconds.
Note The load ratio is calculated in relation to the Servomotor’s rated current.
5-20
An overload protection (electron thermal) function is built into the Servo Driver to protect
against Servo Driver or Servomotor overload. If an overload (A.71 to A.72) does occur,
first clear the cause of the error and then wait at least one minute for the Servomotor
temperature to drop before turning on the power again. If the power is turned on again
too soon, the Servomotor coil may be damaged.
Overload Characteristics (Electron Thermal Characteristics)
Load ratio (%) =
A: 3,000 r/min.-Servomotors, 30 to 400 W
B: 3,000-r/min. Servomotors, 750W to 5 kW
3,000 r/min. Flat-style Servomotors, 100 to 400 W
3,000-r/min. Flat-style Servomotors, 750 W to 1.5 kW
1,000-r/min. Servomotors, 300 W to 5.5 kW
1,500-r/min. Servomotors, 450 W to 15 kW
Servomotor rated current
Servomotor current
Load ratio (%)
× 100
Chapter 5