R88M-WP10030S-BWS1 Omron, R88M-WP10030S-BWS1 Datasheet - Page 254

• Manufacturer Part Number: R88M-WP10030S-BWS1
• Description: SERVO MOTOR 100W 100V W/BRAKE
• Manufacturer: Omron

Specifications of R88M-WP10030S-BWS1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MWP10030SBWS1

Operation
4-4
4-4-1 Setting and Checking Parameters
H Operation Overview
• Use the following procedure to set and check parameters.
H Operation Procedure
D Going into Setting Mode
D Setting the Parameter Number
• Unused parameter numbers are basically not displayed. For example, if you press the Up Key on op-
4-16
operation
operation
eration digit No. 0 while displaying parameter number Pn005, the display will change to Pn100 (as
PR02W
PR02W
S Go into Setting Mode:
S Set the parameter number (Pnjjj):
S Display the parameter setting:
S Change the setting:
S Save the changed setting to memory:
S Return to parameter number display:
Set and check the user parameters using the Setting Mode. Make sure you fully under-
stand the parameter meanings and how to set them before setting user parameters in
the system. Some parameters are enabled by turning OFF the Unit, then turning it ON
again. When changing these parameters, turn OFF the power (check that the power
lamp is not lit), then turn ON the power again.
User Parameters
key operation
key operation
Front panel
Front panel
(less than
1 s)
Display example
Display example
,
,
(
(
)
(
less than 1 s),
(Status Display Mode)
Press the MODE/SET Key to go into Setting Mode
Set the parameter number you want to set or check. If
the parameter number is too big, you can set the
operation to be performed more quickly while changing
the operation digits, using the Left Key (front panel:
DATA Key for less than 1 s) or Right Key.
for 1 s min.)
(
(
,
,
for 1 s min.)
for 1 s min.) (Not required for checking only.)
(
(Not required for checking only.)
less than 1 s),
Explanation
Explanation
Chapter 4