R88M-WP10030S-BWS1 Omron, R88M-WP10030S-BWS1 Datasheet - Page 8

• Manufacturer Part Number: R88M-WP10030S-BWS1
• Description: SERVO MOTOR 100W 100V W/BRAKE
• Manufacturer: Omron

Specifications of R88M-WP10030S-BWS1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MWP10030SBWS1

Storage and Transportation Precautions
Installation and Wiring Precautions
!
!
!
!
!
!
!
!
!
!
!
!
!
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Caution
Do not touch the Servo Driver radiator, regeneration resistors or Servomotor while
the power is being supplied or soon after the power is turned OFF. Doing so may
result in a burn injury due to the hot surface.
Do not hold the product by the cables or motor shaft while transporting it. Doing so
may result in injury or malfunction.
Do not place any load exceeding the figure indicated on the product. Doing so may
result in injury or malfunction.
Use the motor eye-bolts only for transporting the Motor. Using them for transporting
the machinery may result in injury or malfunction.
Do not step on or place a heavy object on the product. Doing so may result in injury.
Do not cover the inlet or outlet ports and prevent any foreign objects from entering
the product. Doing so may result in fire.
Be sure to install the product in the correct direction. Not doing so may result in mal-
function.
Provide the specified clearances between the Servo Driver and the control panel or
with other devices. Not doing so may result in fire or malfunction.
Do not apply any strong impact. Doing so may result in malfunction.
Be sure to wire correctly and securely. Not doing so may result in motor runaway,
injury, or malfunction.
Be sure that all the mounting screws, terminal screws, and cable connector screws
are tightened to the torque specified in the relevant manuals. Incorrect tightening
torque may result in malfunction.
Use crimp terminals for wiring. Do not connect bare stranded wires directly to termi-
nals. Connection of bare stranded wires may result in burning.
Always use the power supply voltage specified in the User’s Manual. An incorrect
voltage may result in malfunction or burning.