MOD5234-100IR NetBurner Inc, MOD5234-100IR Datasheet - Page 51

• Manufacturer Part Number: MOD5234-100IR
• Description: MOD5234 10/100 ETHERNET MODULE
• Manufacturer: NetBurner Inc
• Type: Controllers & Processorsr

Specifications of MOD5234-100IR

• Interface: I²C, SPI, UART
• Voltage - Supply: 2.5V
• Mounting Type: Surface Mount
• Package / Case: Module
• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Format: -
• Baud Rates: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q4483564

1.3.3.1.3
1.3.3.1.4
1.3.4
The ColdFire processor core debug interface is provided to support system debugging in
conjunction with low-cost debug and emulator development tools. Through a standard debug
interface, users can access real-time trace and debug information. This allows the processor and
system to be debugged at full speed without the need for costly in-circuit emulators. The debug
interface is a superset of the BDM interface provided on the 683xx family of parts.
The on-chip breakpoint resources include a total of 8 programmable registers—a set of address
registers (with two 32-bit registers), a set of data registers (with a 32-bit data register plus a 32-bit
data mask register), an address attribute register, a trigger definition register, and one 32-bit PC
register plus a 32-bit PC mask register. These registers can be accessed through the dedicated
debug serial communication channel or from the processor’s supervisor mode programming
model. The breakpoint registers can be configured to generate triggers by combining the address,
data, and PC conditions in a variety of single or dual-level definitions. The trigger event can be
programmed to generate a processor halt or initiate a debug interrupt exception.
To support program trace, the Version 2 debug module provides processor status (PST[3:0]) and
debug data (DDATA[3:0]) ports. These buses and the PSTCLK output provide execution status,
Freescale Semiconductor
• AnglePulse – Output signal based on angle
• All functions from set 1
• DC – DC motor with permanent magnet
• DCE – DC motor with separately excited stator windings
• BLDC – Brushless DC motor with Hall sensors
• QD - Quadrature decode function
• HS - Hall sensor signals decode function
• All functions from set 1
• ACIM – 3-phase AC induction motor with V/Hz control
• ACIMVC – 3-phase AC induction motor with vector control
• PMSMVC – 3-phase PM motor with vector control
• PMSMTVC – 3-phase PM motor with torque vector control
• QD - Quadrature decode function
• HS - Hall sensor signals decode function
Integrated Debug Module
Set 3 (Motor Control 1)
Set 4 (Motor Control 2)
MCF5235 Reference Manual, Rev. 2
Features
1-11