MOD5234-100IR NetBurner Inc, MOD5234-100IR Datasheet - Page 682

• Manufacturer Part Number: MOD5234-100IR
• Description: MOD5234 10/100 ETHERNET MODULE
• Manufacturer: NetBurner Inc
• Type: Controllers & Processorsr

Specifications of MOD5234-100IR

• Interface: I²C, SPI, UART
• Voltage - Supply: 2.5V
• Mounting Type: Surface Mount
• Package / Case: Module
• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Format: -
• Baud Rates: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q4483564

Debug Support
Command Sequence:
Operand Data:
Result Data:
32.5.3.3.11 Read Debug Module Register (
Read the selected debug module register and return the 32-bit result. Note that this read of the CSR
clears CSR[FOF, TRG, HALT, BKPT]; as well as the trigger status bits (CSR[BSTAT]) if either a
level-2 breakpoint has been triggered or a level-1 breakpoint has been triggered and no level-2
breakpoint has been enabled.
Command/Result Formats:
Table 32-21
32-38
Command
WCREG
???
Result
shows the definition of DRc encoding. All values not shown are reserved.
15
’NOT READY’
Figure 32-37.
MS ADDR
14
This instruction requires two longword operands. The first selects the
register to which the operand data is to be written; the second contains the
data.
Successful write operations return 0xFFFF. Bus errors on the write cycle are
indicated by the setting of bit 16 in the status message and by a data pattern
of 0x0001.
0x2
Figure 32-36.
13
12
MCF5235 Reference Manual, Rev. 2
’NOT READY’
RDMREG BDM
MS ADDR
11
10
WCREG
0xD
9
Command Sequence
Command/Result Formats
’NOT READY’
D[31:16]
RDMREG
MS DATA
8
D[15:0]
’NOT READY’
LS DATA
7
)
6
5
REGISTER
CONTROL
WRITE
4
DRc
3
Freescale Semiconductor
’CMD COMPLETE’
’NOT READY’
2
NEXT CMD
BERR
XXX
XXX
’NOT READY’
NEXT CMD
1
0