ALXD800EEXJ2VD AMD (ADVANCED MICRO DEVICES), ALXD800EEXJ2VD Datasheet - Page 334

• Manufacturer Part Number: ALXD800EEXJ2VD
• Manufacturer: AMD (ADVANCED MICRO DEVICES)

Specifications of ALXD800EEXJ2VD

• Operating Temperature (min): 0C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

6.6.7.2
DC Memory Offset 074h
Type
Reset Value
This register contains the data for a palette access cycle. When a read or write to the palette RAM occurs, the previous out-
put value is held for one additional Dot clock period. This effect should go unnoticed and will provide for sparkle-free
updates. Prior to a read or write to this register, the DC_PAL_ADDRESS register (DC Memory Offset 070h) should be
loaded with the appropriate address. The address automatically increments after each access to this register, so for
sequential access, the address register need only be loaded once.
If the SGRE bit in DC_GENERAL_CFG is set (DC Memory Offset 004h[25] = 1), this register reads back the state of the
graphics output pixel stream signature.
6.6.7.3
DC Memory Offset 078h
Type
Reset Value
This register is provided to enable testability of the display FIFO RAM. Before it is accessed, the DIAG bit in the
DC_GENERAL_CFG register should be set high (DC Memory Offset 004h[28] = 1) and the DFLE bit should be set low (DC
Memory Offset 004h[0] = 0). In addition, the TGEN bit should be set low (DC Memory Offset 008h[0] = 0) and all clock gat-
ing should be disabled (MSR 80002004h = 0). Since each FIFO entry is 64 bits, an even number of write operations should
be performed. Each pair of write operations causes the FIFO write pointer to increment automatically. After all write opera-
tions are performed, a pair of reads of don't care data should be performed to load 64 bits of data into the output latch. Each
subsequent read contains the appropriate data that was previously written. Each pair of read operations causes the FIFO
read pointer to increment automatically.
This register is also used for writing to the compressed line buffer. Each pair of writes to this register stores a 64-bit data
value that is used for the next write to the compressed line buffer. The write pulse to the compressed line buffer is gener-
ated by writing dummy data to the DC_PAL_DATA register (DC Memory Offset 074h[23:0]) while in DIAG mode.
334
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
31:24
23:0
31:0
Bit
Bit
DC Palette Data (DC_PAL_DATA)
DC Display FIFO Diagnostic (DC_DFIFO_DIAG)
Name
RSVD
PAL_DATA
Name
DFIFO_DATA
RSVD
R/W
xxxxxxxxh
R/W
xxxxxxxxh
33234C
Description
Reserved.
PAL Data. This 24-bit field contains the read or write data for a palette access. If
DC_GENERAL_CFG[SGRE] (DC Memory Offset 004h [25]) is set, a read to this register
will read back the state of the graphics output pixel stream signature.
Description
Display FIFO Diagnostic Read or Write Data.
DC_DFIFO_DIAG Bit Descriptions
DC_PAL_DATA Bit Descriptions
DC_DFIFO_DIAG Register Map
DC_PAL_DATA Register Map
DFIFO_DATA
PAL_DATA
Display Controller Register Descriptions
AMD Geode™ LX Processors Data Book
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
0
0