ALXD800EEXJ2VD AMD (ADVANCED MICRO DEVICES), ALXD800EEXJ2VD Datasheet - Page 465

• Manufacturer Part Number: ALXD800EEXJ2VD
• Manufacturer: AMD (ADVANCED MICRO DEVICES)

Specifications of ALXD800EEXJ2VD

• Operating Temperature (min): 0C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

Video Input Port
AMD Geode™ LX Processors Data Book
Line 266
In VIP 1.1 mode, the T,F,V video flags are only captured from the EAV code. In VIP 2.X modes, these flags are captured from
both the SAV and the EAV codes. (The H bit is always captured to distinguish between and SAV and EAV code). Note that for VIP
1.1 mode, there must be a minimum of one SAV/EAV scan line during vertical blanking in order for the VBlank flag to transition
from 0->1->0.
An End-of-Frame event is detected the same in VIP 1.1 and VIP 2.0 modes. (A 0->1 transition of VBlank when F = 1 causes an
End-of-Frame event during interlaced video, A 0->1 transition of V-Blank causes an End-of-Frame event during progressive scan
video) An End-of-Frame event is used for starting/stopping capture and for updating buffer addresses. Line #1 of a frame does not
necessarily coincide with the End-of-Frame event. Line #1 is specified differently with respect to VBlank depending on the frame
type (resolution/interlaced/...). When line#1 is defined other then on the falling transition of VBlank, VBI data received after the V-
Blank transition will be stored in updated buffer address. VBI data is generally not sent during this time.
Line 4
Line 3
Field 1
(F = 0)
Field 2
(F = 1)
Even
Odd
H = 1
EAV
H = 0
SAV
Figure 6-41. 525 line, 60 Hz Digital Vertical Timing
Active Video
Active Video
(VBI Data)
(VBI Data)
Blanking
Blanking
Field 1
Field 2
Line 20(V = 0)
Line 264 (V = 1)
Line 283 (V = 0)
Line 525 (V = 0)
Line 1 (V = 1)
Number
264-265
266-282
283-525
20-263
Line
4-19
1-3
33234C
F
1
0
0
0
1
1
V
1
1
0
1
1
0
(EAV)
H
1
1
1
1
1
1
(SAV)
H
0
0
0
0
0
0
465