UPD78F1152AGC-GAD-AX Renesas Electronics America, UPD78F1152AGC-GAD-AX Datasheet - Page 380

• Manufacturer Part Number: UPD78F1152AGC-GAD-AX
• Description: MCU 16BIT 78K0R/KX3 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1152AGC-GAD-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
<R>
378
Address: FFF3CH
(14) Input switch control register (ISC)
Symbol
ISC
Caution Be sure to clear bits 7 to 2 to “0”.
ISC is used to realize a LIN-bus communication operation by UART3 in coordination with an external interrupt
and the timer array unit.
When bit 0 is set to 1, the input signal of the serial data input (R
(INTP0) that can be used to detect a wakeup signal.
When bit 1 is set to 1, the input signal of the serial data input (R
the pulse widths of a sync break field and a sync field can be measured by the timer.
ISC can be set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation clears this register to 00H.
ISC1
ISC0
0
1
0
1
7
0
After reset: 00H
Uses the input signal of the TI07 pin as a timer input (normal operation).
Input signal of R
(to measure the pulse widths of the sync break field and sync field).
Uses the input signal of the INTP0 pin as an external interrupt (normal operation).
Uses the input signal of the R
Figure 12-17. Format of Input Switch Control Register (ISC)
6
0
R/W
CHAPTER 12 SERIAL ARRAY UNIT
X
D3 pin is used as timer input
5
0
User’s Manual U17893EJ8V0UD
Switching channel 7 input of timer array unit
X
Switching external interrupt (INTP0) input
D3 pin as an external interrupt (wakeup signal detection).
4
0
3
0
X
X
D3) pin is selected as a timer input, so that
D3) pin is selected as an external interrupt
2
0
ISC1
1
ISC0
0