UPD78F1152AGC-GAD-AX Renesas Electronics America, UPD78F1152AGC-GAD-AX Datasheet - Page 592

• Manufacturer Part Number: UPD78F1152AGC-GAD-AX
• Description: MCU 16BIT 78K0R/KX3 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1152AGC-GAD-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

590
Note The DST0 flag is automatically cleared to 0 when a DMA transfer is completed.
Remark
Writing the DEN0 flag is enabled only when DST0 = 0. To terminate a DMA transfer without waiting for
occurrence of the interrupt of DMA0 (INTDMA0), set DST0 to 0 and then DEN0 to 0 (for details, refer to
15.5.7 Forcible termination by software).
Figure 15-11. Setting Example of UART Consecutive Reception + ACK Transmission
This is an example where a software trigger is used as a DMA start source.
If ACK is not transmitted and if only data is consecutively received from UART, the UART reception
end interrupt (INTSR0) can be used to start DMA for data reception.
Setting for UART reception
DRA0 = FE00H
DBC0 = 0040H
User program
DMC0 = 00H
DSA0 = 12H
processing
DEN0 = 1
DST0 = 1
Start
CHAPTER 15 DMA CONTROLLER
DEN0 = 0
DST0 = 0
INTSR0 occurs.
RETI
User’s Manual U17893EJ8V0UD
End
INTDMA0
occurs.
Note
INTSR0 interrupt routine
DMA0 transfer
STG0 = 1
P10 = 1
P10 = 0
RETI
Hardware operation