UPD78F1152AGC-GAD-AX Renesas Electronics America, UPD78F1152AGC-GAD-AX Datasheet - Page 40

• Manufacturer Part Number: UPD78F1152AGC-GAD-AX
• Description: MCU 16BIT 78K0R/KX3 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1152AGC-GAD-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

2.2.9 P90 (port 9)
(1) Port mode
2.2.10 P110, P111 (port 11)
(1) Port mode
(2) Control mode
2.2.11 P120 to P124 (port 12)
interrupt request input, potential input for external low-voltage detection, connecting resonator for main system clock,
connecting resonator for subsystem clock, and external clock input for main system clock.
(1) Port mode
(2) Control mode
38
P90 function as an 1-bit I/O port.
The port mode can be specified in 1-bit units.
P110 and P111 function as a 2-bit I/O port. These pins also function as D/A converter analog output.
The following operation modes can be specified in 1-bit units.
P120 functions as a 1-bit I/O port. P121 to P124 function as a 4-bit input port. These pins also function as external
The following operation modes can be specified in 1-bit units.
P90 function as an 1-bit I/O port. P90 can be set to input or output port in 1-bit units using port mode register 9
(PM9). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 9 (PU9).
P110 and P111 function as a 2-bit I/O port. P110 and P111 can be set to input or output port in 1-bit units using
port mode register 11 (PM11).
P110 and P111 function as D/A converter analog output pins (ANO0, ANO1). When using these pins as analog
input pins, see 11.4.3 Cautions.
P120 functions as a 1-bit I/O port. P120 can be set to input or output port using port mode register 12 (PM12).
Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 12 (PU12).
P121 to P124 function as a 4-bit input port.
P120 to P124 function as external interrupt request input, potential input for external low-voltage detection,
connecting resonator for main system clock, connecting resonator for subsystem clock, and external clock input
for main system clock.
(a) INTP0
(b) EXLVI
(c) X1, X2
(d) EXCLK
This is an external interrupt request input pin for which the valid edge (rising edge, falling edge, or both rising
and falling edges) can be specified.
This is a potential input pin for external low-voltage detection.
These are the pins for connecting a resonator for main system clock.
This is an external clock input pin for main system clock.
CHAPTER 2 PIN FUNCTIONS
User’s Manual U17893EJ8V0UD