UPD78F1152AGC-GAD-AX Renesas Electronics America, UPD78F1152AGC-GAD-AX Datasheet - Page 671

• Manufacturer Part Number: UPD78F1152AGC-GAD-AX
• Description: MCU 16BIT 78K0R/KX3 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1152AGC-GAD-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

external input pin (EXLVI)
Notes 1.
Remark <1> to <7> in Figure 21-10 above correspond to <1> to <7> in the description of “When starting
Input voltage from
(set by software)
(set by software)
(set by software)
(set by software)
2.
3.
LVISEL flag
LVIMD flag
LVIMK flag
LVION flag
operation” in 21.4.2 (2) When detecting level of input voltage from external input pin (EXLVI).
LVIIF flag
LVIF flag
The LVIMK flag is set to “1” by reset signal generation.
The interrupt request signal (INTLVI) is generated and the LVIF and LVIIF flags may be set (1).
If LVI operation is disabled when the input voltage of external input pin (EXLVI) is less than or equal to
the detection voltage (V
to 1.
INTLVI
V
EXLVI
Figure 21-10. Timing of Low-Voltage Detector Interrupt Signal Generation
L
<2>
Note 2
Note 2
Note 2
<1>
Note 1
<3>
CHAPTER 21 LOW-VOLTAGE DETECTOR
EXLVI
<6>
Cleared by software
<5>
<7> Cleared by software
<4> Wait time
), an interrupt request signal (INTLVI) is generated and LVIIF may be set
User’s Manual U17893EJ8V0UD
Note 3
(Bit: LVISEL = 1)
Note 3
Time
669