UPD78F1152AGC-GAD-AX Renesas Electronics America, UPD78F1152AGC-GAD-AX Datasheet - Page 440

• Manufacturer Part Number: UPD78F1152AGC-GAD-AX
• Description: MCU 16BIT 78K0R/KX3 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1152AGC-GAD-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

12.6 Operation of UART (UART0, UART1, UART2, UART3) Communication
reception (RxD) lines. It transmits or receives data in asynchronization with the party of communication (by using an
internal baud rate). Full-duplex UART communication can be realized by using two channels, one dedicated to
transmission (even channel) and the other to reception (odd channel).
438
0
1
This is a start-stop synchronization function using two lines: serial data transmission (TxD) and serial data
[Data transmission/reception]
[Interrupt function]
[Error detection flag]
The LIN-bus is supported in UART3 (2, 3 channels of unit 1)
[LIN-bus functions]
UART0 uses channels 0 and 1 of SAU0.
UART1 uses channels 2 and 3 of SAU0.
UART2 uses channels 0 and 1 of SAU1.
UART3 uses channels 2 and 3 of SAU1.
Caution When using serial array units 0 and 1 as UARTs, the channels of both the transmitting side (even-
UART performs the following four types of communication operations.
Unit
• UART transmission
• UART reception
• LIN transmission (UART3 only) (See 12.6.3.)
• LIN reception (UART 3 only)
• Data length of 5, 7, or 8 bits
• Select the MSB/LSB first
• Level setting of transmit/receive data and select of reverse
• Parity bit appending and parity check functions
• Stop bit appending
• Transfer end interrupt/buffer empty interrupt
• Error interrupt in case of framing error, parity error, or overrun error
• Framing error, parity error, or overrun error
• Wakeup signal detection
• Sync break field (SBF) detection
• Sync field measurement, baud rate calculation
number channel) and the receiving side (odd-number channel) can be used only as UARTs.
0
1
2
3
0
1
2
3
Channel
Used as CSI
CSI00
CSI01
CSI10
CSI20
(See 12.6.1.)
(See 12.6.2.)
(See 12.6.4.)
CHAPTER 12 SERIAL ARRAY UNIT
−
−
−
−
User’s Manual U17893EJ8V0UD
UART3 (supporting LIN-bus)
External interrupt (INTP0) or timer array unit (TAU) is
used.
Used as UART
UART0
UART1
UART2
Used as Simplified I
IIC10
IIC20
−
−
−
−
−
−
2
C