HD6417720BP133BV Renesas Electronics America, HD6417720BP133BV Datasheet - Page 1366

• Manufacturer Part Number: HD6417720BP133BV
• Description: SH3-DSP, WITH USB AND LCDC, PB-F
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417720BP133BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: FIFO, I²C, IrDA, MMC, SCI, SD, SIO, SIM, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 117
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 38 Electrical Characteristics
38.2
• Order of turning on 1.5 V power (V
Note: Handling of CA pin
Page 1306 of 1414
power (V
⎯ First turn on the 3.3 V power and 3.3 V/1.8 V power, then turn on the 1.5 V power within 1
⎯ Until voltage is applied to all power supplies and a low level is input to the RESETP pin,
ms. This interval should be as short as possible. The system design must ensure that the
states of pins or undefined period of an internal state do not cause erroneous system
operation.
internal circuits remain unsettled, and so pin states are also undefined. The system design
must ensure that these undefined states do not cause erroneous system operation.
Waveforms at power-on are shown in the following figure.
Other pins *
The CA pin must be ensured to go high before power is turned on. When it is not ensured,
through current flows to the I/O buffer, etc. and it may cause the LSI damage even if a
clock is not input.
RESETP
Note: * Except power/GND, clock related, and analog pins
Power-On and Power-Off Order
GND
CKIO
CC
Q1), and 3.3V power (V
Turn on power while RESETP is low in advance
Pins states undefined
t
PWU
t
UNC
CC
CC
Q, V
, V
VccQ, VccQ1, VccQ_RTC, AVcc, AVcc_USB (min.) power
CC
_PLL1, V
CC
_RTC, AV
VccQ1: 1.8 V/3.3V power
VccQ, VccQ_RTC, AVcc, AVcc_USB: 3.3 V power
Power-on
oscillation setting time
Vcc/2 level voltage
Vcc, Vcc_PLL1, Vcc_PLL2, Vcc_RTC (min.) voltage
Vcc, Vcc_PLL1, Vcc_PLL2, Vcc_RTC: 1.5 V power
t
SOC1
CC
_PLL2, and V
CC
, AV
Power-on
reset state
Oscillation defined
CC
_USB
Pins states defined
CC
_RTC), 1.8 V/3.3 V
SH7720 Group, SH7721 Group
R01UH0083EJ0400 Rev. 4.00
Sep 21, 2010