HD6417720BP133BV Renesas Electronics America, HD6417720BP133BV Datasheet - Page 853

• Manufacturer Part Number: HD6417720BP133BV
• Description: SH3-DSP, WITH USB AND LCDC, PB-F
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417720BP133BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: FIFO, I²C, IrDA, MMC, SCI, SD, SIO, SIM, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 117
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

SH7720 Group, SH7721 Group
R01UH0083EJ0400 Rev. 4.00
Sep 21, 2010
Bit
17
16
15 to 10 ⎯
Bit Name
PESC
CSC
Initial
Value
0
0
All 0
R/W
R/W
R/W
R
Description
Port Enable Status Change
This bit is set when the PES bit is cleared due to a
hardware event. This bit is not set by the change of writing
of HCD. Writing a 1 clears this bit. Writing a 0 has no
effect.
0: PortEnableStatus not changed
1: PortEnableStatus changed
Connect Status Change
This bit is set whenever the connection or disconnection
event occurs. Writing a 1 clears this bit. Writing a 0 has no
effect. If the CCS bit is cleared when SetPortReset,
SetPortEnable, or SetPortSuspend is written to, writing
when the power supply of the port is disconnected does
not occur, so this bit is set to enforce the driver to re-
evaluate the connection status.
0: CurrentConnectionStatus not changed
1: CurrentConnectionStatus changed
Note: If the DR bit in USBHRDB is set, this bit is set only
Reserved
These bits are always read as 0. The write value should
always be 0.
after the root hub reset to inform that the system
that a device can be attached.
Section 24 USB Host Controller (USBH)
Page 793 of 1414