HD6417720BP133BV Renesas Electronics America, HD6417720BP133BV Datasheet - Page 645

• Manufacturer Part Number: HD6417720BP133BV
• Description: SH3-DSP, WITH USB AND LCDC, PB-F
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417720BP133BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: FIFO, I²C, IrDA, MMC, SCI, SD, SIO, SIM, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 117
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

SH7720 Group, SH7721 Group
17.5
17.5.1
The following RTC registers cannot be written to during an RTC count (while bit 0 = 1 in RCR2).
RSECCNT, RMINCNT, RHRCNT, RDAYCNT, RWKCNT, RMONCNT, RYRCNT
The RTC count must be stopped before writing to any of the above registers.
17.5.2
The method of using the periodic interrupt function is shown in figure 17.5.
A periodic interrupt can be generated periodically at the interval set by the flags PES0 to PES2 in
RCR2. When the time set by the PES0 to PES2 has elapsed, the PEF is set to 1.
The PEF is cleared to 0 upon periodic interrupt generation or when the flags PES0 to PES2 are set.
Periodic interrupt generation can be confirmed by reading this bit, but normally the interrupt
function is used.
17.5.3
When a transition to standby mode is made after registers in the RTC are set, sometimes counting
is not performed correctly. In case the registers are set, be sure to make a transition to standby
mode after waiting for two RTC clocks or more.
R01UH0083EJ0400 Rev. 4.00
Sep 21, 2010
Usage Notes
Register Writing during RTC Count
Use of Realtime Clock (RTC) Periodic Interrupts
Transition to Standby Mode after Setting Register
Figure 17.5 Using Periodic Interrupt Function
Elapse of time set by PES
Set PES, clear PEF
Clear PEF
Set PES0 to PES2,
and clear PEF to 0,
in RCR2
Clear PEF to 0
Section 17 Realtime Clock (RTC)
Page 585 of 1414