LPC2468FET208,551 NXP Semiconductors, LPC2468FET208,551 Datasheet - Page 295

• Manufacturer Part Number: LPC2468FET208,551
• Description: IC ARM7 MCU FLASH 512K 208TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2468FET208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-TFBGA
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2S/ISP/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 6
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, IRD-LPC2468-DEV, SAB-TFBGA208, KSK-LPC2468-PL
• Development Tools By Supplier: OM10100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Package: 208TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1025 - KIT DEV IND REF DESIGN LPC2468622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4358 - DISPLAY QVGA TFT FOR OM10100568-4309 - BOARD EXTENSION LPCSTICK568-4308 - EVAL LPC-STICK WITH LPC2468MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4262; 935283234551; LPC2468FET208-S

NXP Semiconductors
UM10237_4
User manual
6.5.2 Cursor sizes
6.5.3 Cursor movement
6.5.4 Cursor XY positioning
When the display point is inside the bounds of the cursor image, the cursor replaces
frame buffer pixels with cursor pixels.
When the last cursor pixel is displayed, an interrupt is generated that software can use as
an indication that it is safe to modify the cursor image. This enables software controlled
animations to be performed without flickering for frame synchronized cursors.
Two cursor sizes are supported, as shown in
Table 253. Palette data storage for STN monochrome mode.
The following descriptions assume that both the screen and cursor origins are at the top
left of the visible screen (the first visible pixel scanned each frame).
how each pixel coordinate is assumed to be the top left corner of the pixel.
The CRSR_XY register controls the cursor position on the cursor overlay (see Cursor XY
Position register). This provides separate fields for X and Y ordinates.
The CRSR_CFG register (see Cursor Configuration register) provides a FrameSync bit
controlling the visible behavior of the cursor.
X Pixels
32
64
Fig 37. Cursor movement
Y Pixels
32
64
(0,0)
Rev. 04 — 26 August 2009
CRSR_XY(X)
Bits per pixel
2
2
Words per line
2
4
Table
Chapter 12: LPC24XX LCD controller
12–253.
Words in cursor image
64
256
Figure 12–37
UM10237
© NXP B.V. 2009. All rights reserved.
295 of 792
shows