LPC2468FET208,551 NXP Semiconductors, LPC2468FET208,551 Datasheet - Page 452

• Manufacturer Part Number: LPC2468FET208,551
• Description: IC ARM7 MCU FLASH 512K 208TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2468FET208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-TFBGA
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2S/ISP/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 6
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, IRD-LPC2468-DEV, SAB-TFBGA208, KSK-LPC2468-PL
• Development Tools By Supplier: OM10100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Package: 208TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1025 - KIT DEV IND REF DESIGN LPC2468622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4358 - DISPLAY QVGA TFT FOR OM10100568-4309 - BOARD EXTENSION LPCSTICK568-4308 - EVAL LPC-STICK WITH LPC2468MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4262; 935283234551; LPC2468FET208-S

NXP Semiconductors
UM10237_4
User manual
4.6 UART1 FIFO Control Register (U1FCR - 0xE001 0008, Write Only)
4.7 UART1 Line Control Register (U1LCR - 0xE001 000C)
It is the lowest priority interrupt and is activated whenever there is any state change on
modem inputs pins, DCD, DSR or CTS. In addition, a low to high transition on modem
input RI will generate a modem interrupt. The source of the modem interrupt can be
determined by examining U1MSR[3:0]. A U1MSR read will clear the modem interrupt.
The U1FCR controls the operation of the UART1 RX and TX FIFOs.
Table 404. UART1 FIFO Control Register (U1FCR - address 0xE001 0008, Write Only) bit
The U1LCR determines the format of the data character that is to be transmitted or
received.
Table 405. UART1 Line Control Register (U1LCR - address 0xE001 000C) bit description
Bit
0
1
2
5:3
7:6
Bit
1:0
2
3
Symbol Value Description
Word
Length
Select
Stop Bit
Select
Parity
Enable
Symbol
FIFO
Enable
RX FIFO
Reset
TX FIFO
Reset
-
RX
Trigger
Level
description
00
01
10
11
0
1
0
1
Value Description
0
1
0
1
0
1
00
01
10
11
5 bit character length.
6 bit character length.
7 bit character length.
8 bit character length.
1 stop bit.
2 stop bits (1.5 if U1LCR[1:0]=00).
Disable parity generation and checking.
Enable parity generation and checking.
Rev. 04 — 26 August 2009
UART1 FIFOs are disabled. Must not be used in the application.
Active high enable for both UART1 Rx and TX FIFOs and
U1FCR[7:1] access. This bit must be set for proper UART1
operation. Any transition on this bit will automatically clear the
UART1 FIFOs.
No impact on either of UART1 FIFOs.
Writing a logic 1 to U1FCR[1] will clear all bytes in UART1 Rx
FIFO and reset the pointer logic. This bit is self-clearing.
No impact on either of UART1 FIFOs.
Writing a logic 1 to U1FCR[2] will clear all bytes in UART1 TX
FIFO and reset the pointer logic. This bit is self-clearing.
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
These two bits determine how many receiver UART1 FIFO
characters must be written before an interrupt is activated.
Trigger level 0 (1 character or 0x01).
Trigger level 1 (4 characters or 0x04).
Trigger level 2 (8 characters or 0x08).
Trigger level 3 (14 characters or 0x0E).
Chapter 17: LPC24XX UART1
UM10237
© NXP B.V. 2009. All rights reserved.
452 of 792
Reset
Value
0
0
0
NA
0
Reset
Value
0
0
0