LPC2468FET208,551 NXP Semiconductors, LPC2468FET208,551 Datasheet - Page 427

• Manufacturer Part Number: LPC2468FET208,551
• Description: IC ARM7 MCU FLASH 512K 208TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2468FET208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-TFBGA
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 98K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2S/ISP/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 6
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, IRD-LPC2468-DEV, SAB-TFBGA208, KSK-LPC2468-PL
• Development Tools By Supplier: OM10100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Package: 208TFBGA
• Device Core: ARM7TDMI-S
• Family Name: LPC2000
• Maximum Speed: 72 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1025 - KIT DEV IND REF DESIGN LPC2468622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4358 - DISPLAY QVGA TFT FOR OM10100568-4309 - BOARD EXTENSION LPCSTICK568-4308 - EVAL LPC-STICK WITH LPC2468MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4262; 935283234551; LPC2468FET208-S

NXP Semiconductors
UM10237_4
User manual
4.1 UARTn Receiver Buffer Register (U0RBR - 0xE000 C000, U2RBR -
4.2 UARTn Transmit Holding Register (U0THR - 0xE000 C000, U2THR -
4.3 UARTn Divisor Latch LSB Register (U0DLL - 0xE000 C000, U2DLL -
0xE007 8000, U3RBR - 0xE007 C000 when DLAB = 0, Read Only)
The UnRBR is the top byte of the UARTn Rx FIFO. The top byte of the Rx FIFO contains
the oldest character received and can be read via the bus interface. The LSB (bit 0)
represents the “oldest” received data bit. If the character received is less than 8 bits, the
unused MSBs are padded with zeroes.
The Divisor Latch Access Bit (DLAB) in LCR must be zero in order to access the UnRBR.
The UnRBR is always Read Only.
Since PE, FE and BI bits correspond to the byte sitting on the top of the RBR FIFO (i.e.
the one that will be read in the next read from the RBR), the right approach for fetching the
valid pair of received byte and its status bits is first to read the content of the U0LSR
register, and then to read a byte from the UnRBR.
Table 378. UARTn Receiver Buffer Register (U0RBR - address 0xE000 C000,
0xE007 8000, U3THR - 0xE007 C000 when DLAB = 0, Write Only)
The UnTHR is the top byte of the UARTn TX FIFO. The top byte is the newest character in
the TX FIFO and can be written via the bus interface. The LSB represents the first bit to
transmit.
The Divisor Latch Access Bit (DLAB) in UnLCR must be zero in order to access the
UnTHR. The UnTHR is always Write Only.
Table 379. UART0 Transmit Holding Register (U0THR - address 0xE000 C000,
0xE007 8000, U3DLL - 0xE007 C000 when DLAB = 1) and UARTn
Divisor Latch MSB Register (U0DLM - 0xE000 C004, U2DLL -
0xE007 8004, U3DLL - 0xE007 C004 when DLAB = 1)
The UARTn Divisor Latch is part of the UARTn Baud Rate Generator and holds the value
used to divide the APB clock (PCLK) in order to produce the baud rate clock, which must
be 16× the desired baud rate. The UnDLL and UnDLM registers together form a 16 bit
divisor where UnDLL contains the lower 8 bits of the divisor and UnDLM contains the
Bit
7:0
Bit
7:0
Symbol
RBR
Symbol
THR
U2RBR - 0xE007 8000, U3RBR - 0E007 C000 when DLAB = 0, Read Only) bit
description
U2THR - 0xE007 8000, U3THR - 0xE007 C000 when DLAB = 0, Write Only) bit
description
Description
The UARTn Receiver Buffer Register contains the oldest
received byte in the UARTn Rx FIFO.
Description
Writing to the UARTn Transmit Holding Register causes the data
to be stored in the UARTn transmit FIFO. The byte will be sent
when it reaches the bottom of the FIFO and the transmitter is
available.
Rev. 04 — 26 August 2009
Chapter 16: LPC24XX UART0/2/3
UM10237
© NXP B.V. 2009. All rights reserved.
Reset Value
Undefined
Reset Value
NA
427 of 792