DF2117VT20V Renesas Electronics America, DF2117VT20V Datasheet - Page 259

• Manufacturer Part Number: DF2117VT20V
• Description: MCU 16BIT FLASH 3V 160K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2117VT20V

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: FIFO, I²C, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.5
8.5.1
The module stop control register can be used to enable or disable PWMU operation. The default
setting disables PWMU operation. Clearing the module stop mode enables registers to be
accessed. For details, see section 26, Power-Down Modes.
8.5.2
When the duty cycle is to be changed in usage of a 16-bit single-pulse PWM timer, the higher- and
lower-order eight bits must be individually written to the respective PWMREGn (n = 0 to 5)
registers. There will thus be a time lag between the write operations, and this may lead to the
output of a pulse waveform with a duty cycle other than the intended one during the corresponding
period.
Also, care must be taken to ensure that there are no interrupts while writing to PWMREGn is in
progress, since interrupt processing can lead to the continued output of pulses with a duty cycle
other than the intended one.
Usage Note
Setting Module Stop Mode
Note on Using 16-Bit Single-Pulse PWM Timer
Rev. 2.00 Sep. 28, 2009 Page 217 of 994
REJ09B0452-0200