DF2117VT20V Renesas Electronics America, DF2117VT20V Datasheet - Page 897

• Manufacturer Part Number: DF2117VT20V
• Description: MCU 16BIT FLASH 3V 160K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2117VT20V

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: FIFO, I²C, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

The list of registers gives information on the on-chip register addresses, how the register bits are
configured, the register states in each operating mode, the register selection condition, and the
register address of each module. The information is given as shown below.
1. Register addresses (address order)
• Registers are listed from the lower allocation addresses.
• For the addresses of 16 bits, the MSB is described.
• Registers are classified by functional modules.
• The access size is indicated.
• H8S/2140B Group compatible register addresses or extended register addresses are selected
2. Register bits
• Bit configurations of the registers are described in the same order as the register addresses in
• Reserved bits are indicated by ⎯ in the bit name column.
• The bit number in the bit-name column indicates that the whole register is allocated as a
• Each line covers eight bits, and 16-bit register is shown as 2 lines, respectively.
3. Register states in each operating mode
• Register states are described in the same order as the register addresses in section 27.1,
• The register states described here are for the basic operating modes. If there is a specific reset
4. Register selection conditions
• Register selection conditions are described in the same order as the register addresses in
• For register selection conditions, see section 3.2.2, System Control Register (SYSCR), section
5. Register addresses (classification by type of module)
• The register addresses are described by modules
• The register addresses are described in channel order when the module has multiple channels.
depending on the RELOCATE bit in system control register 3 (SYSCR3).
When the extended register addresses are selected, the some register addresses of ICC_1,
TMR_Y, PWMX_0, and PORT are changed. Therefore, the selection with other module
registers that share the same addresses with these registers is not necessary.
section 27.1, Register Addresses (Address Order).
counter or for holding data.
Register Addresses (Address Order).
for an on-chip peripheral module, see the section on that on-chip peripheral module.
section 27.1, Register Addresses (Address Order).
3.2.3, Serial Timer Control Register (STCR), section 26.1.3, Module Stop Control Registers H,
L, A, and B (MSTPCRH, MSTPCRL, MSTPCRA, MSTPCRB), or register descriptions for
each module.
Section 27 List of Registers
Rev. 2.00 Sep. 28, 2009 Page 855 of 994
REJ09B0452-0200