DF2117VT20V Renesas Electronics America, DF2117VT20V Datasheet - Page 380

• Manufacturer Part Number: DF2117VT20V
• Description: MCU 16BIT FLASH 3V 160K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2117VT20V

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: FIFO, I²C, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

12.3.9
TDPCR1 selects the input capture input edge, starts the TDPCNT counter, selects the counter
clock, and controls the operating mode.
Rev. 2.00 Sep. 28, 2009 Page 338 of 994
REJ09B0452-0200
Bit
7
6
5
Bit Name
CST
POCTL
CPSPE
TDP Control Register 1 (TDPCR1)
Initial
Value R/W
0
0
0
R/W
R/W
R/W
Description
Counter Start
In timer mode, setting this bit to 1 starts counting by
TDPCNT, and clearing it stops counting. After the bit is
cleared, the counter is initialized to H'0000, and the input-
capture operation stops.
Clear this bit to initialize TDPCNT to H'0000 before setting
to cycle measurement mode.
TDPCYI Input Polarity Inversion
0: TDPCYI input is used directly
1: TDPCYI input is inverted for use
Note: Change this bit when CST = 0 and TDPMDS = 0.
Input Capture Stop Enable
Controls whether counting up by TDPCNT and input-
capture operation stop or continue when any of the
TPDMXOVF, TPDMNUDF, TWDMXOVF, and TWDMNUDF
flags is set to 1 in cycle measurement mode. This bit does
not affect operation in timer mode.
0: Counting up and input-capture operation continue when
1: Counting up and input-capture operation stop when any
any of the flags is set to 1.
of the flags is set to 1.