DF2117VT20V Renesas Electronics America, DF2117VT20V Datasheet - Page 811

• Manufacturer Part Number: DF2117VT20V
• Description: MCU 16BIT FLASH 3V 160K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2117VT20V

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: FIFO, I²C, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(b)
FPFR indicates the return value of the programming result.
Bit
7
6
5
4
3
Programming
Bit Name
⎯
MD
EE
FK
⎯
Initial
Value
⎯
⎯
⎯
⎯
⎯
R/W
⎯
R/W
R/W
R/W
⎯
Description
Unused
Returns 0.
Programming Mode Related Setting Error Detect
Detects the error protection state and returns the result.
When the error protection state is entered, this bit is set
to 1. Whether the error protection state is entered or not
can be confirmed with the FLER bit in FCCS. For
conditions to enter the error protection state see section
24.9.3, Error Protection.
0: Normal operation (FLER = 0)
1: Error protection state, and programming cannot be
Programming Execution Error Detect
Writes 1 to this bit when the specified data could not be
written because the user MAT was not erased. If this bit
is set to 1, there is a high possibility that the user MAT
has been written to partially. In this case, after removing
the error factor, erase the user MAT. Also an attempt to
write the user MAT when the FMATS value is H'AA and
the user boot MAT is selected leads to a programming
execution error. In that case, both the user MAT and
user boot MAT are not rewritten. Writing to the user boot
MAT must be performed in boot mode or programmer
mode.
0: Programming has ended normally
1: Programming has ended abnormally (programming
Checks the FKEY value (H'5A) before programming
starts, and returns the result.
0: FKEY setting is normal (H'5A)
1: FKEY setting is abnormal (value other than H'5A)
Unused
Returns 0.
Flash Key Register Error Detect
performed (FLER = 1)
result is not guaranteed)
Rev. 2.00 Sep. 28, 2009 Page 769 of 994
REJ09B0452-0200