DF2117VT20V Renesas Electronics America, DF2117VT20V Datasheet - Page 325

• Manufacturer Part Number: DF2117VT20V
• Description: MCU 16BIT FLASH 3V 160K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2117VT20V

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: FIFO, I²C, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

10.5.5
In phase counting mode, the phase difference between two external clock inputs is detected and
TCNT is incremented/decremented accordingly. This mode can be set for channels 1 and 2. When
phase counting mode is set, an external clock is selected as the counter input clock and TCNT
operates as an up/down-counter regardless of the setting of bits TPSC2 to TPSC0 and bits CKEG1
and CKEG0 in TCR. However, the functions of bits CCLR1 and CCLR0 in TCR, and of TIOR,
TIER, and TGR are valid, and input capture/compare match and interrupt functions can be used.
This can be used for two-phase encoder pulse input. When overflow occurs while TCNT is
counting up, the TCFV flag in TSR is set; when underflow occurs while TCNT is counting down,
the TCFU flag is set. The TCFD bit in TSR is the count direction flag. Reading the TCFD flag
provides an indication of whether TCNT is counting up or down. Table 10.20 shows the
correspondence between external clock pins and channels.
Table 10.20 Phase Counting Mode Clock Input Pins
(1)
Figure 10.25 shows an example of the phase counting mode setting procedure.
Channels
When channel 1 is set to phase counting mode
When channel 2 is set to phase counting mode
Example of Phase Counting Mode Setting Procedure
Phase Counting Mode
Figure 10.25 Example of Phase Counting Mode Setting Procedure
Select phase counting mode
<Phase counting mode>
Phase counting mode
Start count
[1]
[2]
[1]
[2]
Select phase counting mode with bits MD3 to
MD0 in TMDR.
Set the CST bit in TSTR to 1 to start the count
operation.
TCLKA
TCLKC
A-Phase
Rev. 2.00 Sep. 28, 2009 Page 283 of 994
External Clock Pins
B-Phase
TCLKB
TCLKD
REJ09B0452-0200