DF2117VT20V Renesas Electronics America, DF2117VT20V Datasheet - Page 865

• Manufacturer Part Number: DF2117VT20V
• Description: MCU 16BIT FLASH 3V 160K 144-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2117VT20V

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: FIFO, I²C, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-TQFP, 144-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(c)
The boot program will use the programming program transferred by the programming selection to
program the user MATs in response to 128-byte programming.
Command
• Command, H'50, (one byte): 128-byte programming
• Programming Address (four bytes): Start address for programming
• Program data (128 bytes): Data to be programmed
• SUM (one byte): Checksum
Response
• Response, H'06, (one byte): Response to 128-byte programming
Error Response
• Error response, H'D0, (one byte): Error response for 128-byte programming
• ERROR: (one byte): Error code
The specified address should match the unit for programming of data. For example, when the
programming is in 128-byte units, the lower eight bits of the address should be H'00 or H'80.
When there are less than 128 bytes of data to be programmed, the host should fill the rest with
H'FF.
Sending the 128-byte programming command with the address of H'FFFFFFFF will stop the
programming operation. The boot program will interpret this as the end of the programming and
wait for selection of programming or erasing.
Multiple of the size specified in response to the programming unit inquiry
(i.e. H'00, H'01, H'00, H'00 : H'00010000)
The size is specified in the response to the programming unit inquiry.
On completion of programming, the boot program will return ACK.
128-Byte Programming
H'11: Checksum Error
H'2A: Address Error
H'53: Programming error
H'50
Data
…
SUM
H'06
The address is not within the specified MAT range.
A programming error has occurred and programming cannot be continued.
H'D0
Address
…
ERROR
Rev. 2.00 Sep. 28, 2009 Page 823 of 994
REJ09B0452-0200