HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 238

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 7 Bus Controller
7.4.2
The external space bus specifications consist of three elements: bus width, number of access
states, and number of program wait states.
The bus width and number of access states for on-chip memory and internal I/O registers are
fixed, and are not affected by the bus controller.
(1) Bus Width: A bus width of 8 or 16 bits can be selected with ABWCR. An area for which an
(2) Number of Access States: Two or three access states can be selected with ASTCR.
(3) Number of Program Wait States: When 3-state access space is designated by ASTCR, the
Rev. 6.00 Mar. 18, 2010 Page 176 of 982
REJ09B0054-0600
8-bit bus is selected functions as an 8-bit access space, and an area for which a 16-bit bus is
selected functions as a16-bit access space.
If all areas are designated for 8-bit access, 8-bit bus mode is set; if any area is designated for
16-bit access, 16-bit bus mode is set. When the burst ROM interface is designated, 16-bit bus
mode is always set.
An area for which 2-state access is selected functions as a 2-state access space, and an area for
which 3-state access is selected functions as a 3-state access space.
With the burst ROM interface, the number of access states may be determined without regard
to ASTCR.
When 2-state access space is designated, wait insertion is disabled.
number of program wait states to be inserted automatically is selected with WCRH and
WCRL.
From 0 to 3 program wait states can be selected.
Bus Specifications