HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 614

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 15 Serial Communication Interface (SCI)
• Serial status register (SSR)
• Smart card mode register (SCMR)
• Bit rate register (BRR)
• Serial expansion mode register (SEMR0)*
15.3.1
RSR is a shift register that is used to receive serial data input to the RxD pin and convert it into
parallel data. When one byte of data has been received, it is transferred to RDR automatically.
RSR cannot be directly accessed by the CPU.
15.3.2
RDR is an 8-bit register that stores received data. When the SCI has received one byte of serial
data, it transfers the received serial data from RSR to RDR, where it is stored. After this, RSR is
receive-enabled. As RSR and RDR function as a double buffer in this way, continuous receive
operations are possible. After confirming that the RDRF bit in SSR is set to 1, read RDR only
once.
RDR cannot be written to by the CPU.
RDR is initialized to H'00 by a reset, in standby mode, watch mode, subactive mode, subsleep
mode, or module stop mode.
15.3.3
TDR is an 8-bit register that stores data for transmission. When the SCI detects that TSR is empty,
it transfers the transmit data written in TDR to TSR and starts transmission. The double-buffered
structure of TDR and TSR enables continuous serial transmission. If the next transmit data has
already been written to TDR during serial transmission, the SCI transfers the written data to TSR
to continue transmission. Although TDR can be read or written to by the CPU at all times, to
achieve reliable serial transmission, write transmit data to TDR only once after confirming that the
TDRE bit in SSR is set to 1.
TDR is initialized to H'FF by a reset, in standby mode, watch mode, subactive mode, subsleep
mode or module stop mode.
Rev. 6.00 Mar. 18, 2010 Page 552 of 982
REJ09B0054-0600
Note: * This register is in the channel 0 of the H8S/2239 Group only.
Receive Data Register (RDR)
Transmit Data Register (TDR)
Receive Shift Register (RSR)