HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 472

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 11 16-Bit Timer Pulse Unit (TPU)
Example of Cascaded Operation Setting Procedure: Figure 11.18 shows an example of the
setting procedure for cascaded operation.
Examples of Cascaded Operation: Figure 11.19 illustrates the operation when counting upon
TCNT_2 overflow/underflow has been set for TCNT_1, TGRA_1 and TGRA_2 have been
designated as input capture registers, and the TIOC pin rising edge has been selected.
When a rising edge is input to the TIOCA1 and TIOCA2 pins simultaneously, the upper 16 bits of
the 32-bit data are transferred to TGRA_1, and the lower 16 bits to TGRA_2.
Figure 11.20 illustrates the operation when counting upon TCNT_2 overflow/underflow has been
set for TCNT_1, and phase counting mode has been designated for channel 2.
Rev. 6.00 Mar. 18, 2010 Page 410 of 982
REJ09B0054-0600
TCNT_1
clock
TCNT_1
TCNT_2
clock
TCNT_2
TIOCA1,
TIOCA2
TGRA_1
TGRA_2
<Cascaded operation>
H'FFFF
H'03A1
Cascaded operation
Figure 11.18 Cascaded Operation Setting Procedure
Set cascading
Start count
Figure 11.19 Example of Cascaded Operation (1)
[1]
[2]
H'0000
[1]
[2]
Set bits TPSC2 to TPSC0 in the channel 1
(channel 4) TCR to B'1111 to select TCNT_2
(TCNT_5) overflow/underflow counting.
Set the CST bit in TSTR for the upper and lower
channel to 1 to start the count operation.
H'03A2
H'03A2
H'0000
H'0001