HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 281

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit
11
10
9
8
Bit Name
DTA1B
DTA1A
DTA0B
DTA0A
Initial Value
0
0
0
0
R/W
R/W
R/W
R/W
R/W
Description
Data Transfer Acknowledge 1B
Data Transfer Acknowledge 1A
Data Transfer Acknowledge 0B
Data Transfer Acknowledge 0A
These bits enable or disable clearing when
DMA transfer is performed for the internal
interrupt source selected by the DTF3 to DTF0
bits in DMACR.
It the DTA bit is set to 1 when DTE = 1, the
internal interrupt source is cleared automatically
by DMA transfer. When DTE = 1 and DTA = 1,
the internal interrupt source does not issue an
interrupt request to the CPU or DTC.
If the DTA bit is cleared to 0 when DTE = 1, the
internal interrupt source is not cleared when a
transfer is performed, and can issue an interrupt
request to the CPU or DTC in parallel. In this
case, the interrupt source should be cleared by
the CPU or DTC transfer.
When DTE = 0, the internal interrupt source
issues an interrupt request to the CPU or DTC
regardless of the DTA bit setting.
0: Clearing is disabled when DMA transfer is
1: Clearing is enabled when DMA transfer is
performed for the selected internal interrupt
source
performed for the selected internal interrupt
source
Rev. 6.00 Mar. 18, 2010 Page 219 of 982
Section 8 DMA Controller (DMAC)
REJ09B0054-0600