HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 293

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

8.3.7
DMATCR controls enabling or disabling of output from the DMAC transfer end pin. A port can
be set for output automatically, and a transfer end signal output, by setting the appropriate bit. The
TEND pin is available only for channel B in short address mode. Except for the block transfer
mode, a transfer end signal asserts in the transfer cycle in which the transfer counter contents
reaches 0 regardless of the activation source. In the block transfer mode, a transfer end signal
asserts in the transfer cycle in which the block counter contents reaches 0.
8.4
DMAC activation sources consist of internal interrupt requests, external requests, and auto-
requests. The DMAC activation sources that can be specified depend on the transfer mode and
channel, as shown in table 8.3.
Bit
7, 6
5
4
3 to 0
Activation Sources
DMA Terminal Control Register (DMATCR)
Bit Name
⎯
TEE1
TEE0
⎯
Initial Value
All 0
0
0
All 0
R/W
⎯
R/W
R/W
⎯
Description
Reserved
These bits are always read as 0 and cannot be
modified.
Transfer End Enable 1
Enables or disables transfer end pin 1 (TEND1)
output.
0: TEND1 pin output disabled
1: TEND1 pin output enabled
Transfer End Enable 0
Enables or disables transfer end pin 0 (TEND0)
output.
0: TEND0 pin output disabled
1: TEND0 pin output enabled
Reserved
These bits are always read as 0 and cannot be
modified.
Rev. 6.00 Mar. 18, 2010 Page 231 of 982
Section 8 DMA Controller (DMAC)
REJ09B0054-0600