HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 566

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 14 IEBus™ Controller (IEB) [H8S/2258 Group]
14.3.4
IEAR1 sets the lower 4 bits of the master unit address and communications mode. In master
communications, the master unit address becomes the master address field value. In slave
communications, the master unit address is compared with the received slave address field.
Rev. 6.00 Mar. 18, 2010 Page 504 of 982
REJ09B0054-0600
Bit
7
6
5
4
3
2
1
0
Bit Name
IAR3
IAR2
IAR1
IAR0
IMD1
IMD0
⎯
STE
IEBus Master Unit Address Register 1 (IEAR1)
Initial
Value
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
⎯
R/W
Description
Lower 4 Bits of IEBus Master Unit Address
Set the lower 4 bits of the master unit address.
IEBus Communications Mode
Set IEBus communications mode.
00: Communications mode 0
01: Communications mode 1
10: Communications mode 2
11: Setting prohibited
Reserved
This bit is always read as 0 and cannot be modified.
Slave Transmission Setting
Sets bit 4 in the slave status register. Transmitting the
slave status register informs the master unit that the slave
transmission enabled state is entered by setting this bit to
1. Note that this bit only sets the slave status register value
and does not affect slave transmission directly.
0: Bit 4 in the slave status register is 0 (slave transmission
1: Bit 4 in the slave status register is 1 (slave transmission
stop state)
enabled state)