HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 535

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 13 Watchdog Timer (WDT)
13.4
Operation
13.4.1
Watchdog Timer Mode
To use the WDT as a watchdog timer, set the WT/IT bit in TCSR and the TME bit to 1.
Software must prevent TCNT overflows by rewriting the TCNT value (normally be writing H'00)
before overflows occurs. Thus, TCNT does not overflow while the system is operating normally.
When the WDT is used as a watchdog timer and the RSTE bit in RSTCSR of WDT_0 is set to 1,
and if TCNT overflows without being rewritten because of a system malfunction or other error, an
internal reset signal for this LSI is output for 518 system clocks.
When the RST/NMI bit in TCSR of WDT_1 is set to 1, and if TCNT overflows, the internal reset
signal is output for 516 system clock periods. When the RST/NMI bit is cleared to 0, an NMI
interrupt request is generated (for 515 or 516 system clock periods when the clock source is set to
φ
(PSS = 1)).
SUB
An internal reset request from the watchdog timer and a reset input from the RES pin are both
treated as having the same vector. If a WDT internal reset request and the RES pin reset occur at
the same time, the RES pin reset has priority and the WOVF bit in RSTCSR is cleared to 0.
An NMI request from the watchdog timer and an interrupt request from the NMI pin are both
treated as having the same vector. So, avoid handling an NMI request from the watchdog timer
and an interrupt request from the NMI pin at the same time.
Rev. 6.00 Mar. 18, 2010 Page 473 of 982
REJ09B0054-0600