HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 668

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 15 Serial Communication Interface (SCI)
15.6.4
Figure 15.21 shows an example of SCI operation for reception in clocked synchronous mode. In
serial reception, the SCI operates as described below.
1. The SCI performs internal initialization synchronous with a synchronous clock input or output,
2. If an overrun error occurs (when reception of the next data is completed while the RDRF flag
3.
Reception cannot be resumed while a receive error flag is set to 1. Accordingly, clear the ORER,
FER, PER, and RDRF bits to 0 before resuming reception. Figure 15.22 shows a sample flow
chart for serial data reception.
An overrun error occurs or synchronous clocks are output until the RE bit is cleared to 0 when an
internal clock is selected and only receive operation is possible. When a transmission and
reception will be carried out in a unit of one frame, be sure to carry out a dummy transmission
with only one frame by the simultaneous transmit and receive operations at the same time.
Rev. 6.00 Mar. 18, 2010 Page 606 of 982
REJ09B0054-0600
starts receiving data, and stores the received data in RSR.
in SSR is still set to 1), the ORER bit in SSR is set to 1. If the RIE bit in SCR is set to 1 at this
time, an ERI interrupt request is generated, receive data is not transferred to RDR, and the
RDRF flag remains to be set to 1.
If reception is completed successfully, the RDRF bit in SSR is set to 1, and receive data is
transferred to RDR. If the RIE bit in SCR is set to 1 at this time, an RXI interrupt request is
generated. Continuous reception is possible because the RXI interrupt routine reads the
receive data transferred to RDR before reception of the next receive data has finished.
Synchronization
clock
Serial data
RDRF
ORER
Serial Data Reception (Clocked Synchronous Mode)
Figure 15.21 Example of SCI Operation in Reception
RXI interrupt
request
generated
Bit 7
Bit 0
RDR data read and
RDRF flag cleared
to 0 in RXI interrupt
1 frame
Bit 7
Bit 0
RXI interrupt
request generated
Bit 1
ERI interrupt request
generated by overrun
error
Bit 6
Bit 7