HD64F2239TF20I Renesas Electronics America, HD64F2239TF20I Datasheet - Page 831

• Manufacturer Part Number: HD64F2239TF20I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of HD64F2239TF20I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit
5
4
3
2
NESEL
SUBSTP
RFCUT
—
Bit Name
Initial Value
0
0
0
0
R/W
R/W
R/W
R/W
R/W
Description
Noise Elimination Sampling Frequency Select
This bit selects the sampling frequency of the
subclock (φ
is sampled by the clock (φ) generated by the system
clock oscillator
Set 0 when φ is 5 MHz or higher. Set 1 when φ is 2.1
MHz or lower. Any value can be set when φ is 2.1 to
5 MHz.
0: Sampling using 1/32 × φ
1: Sampling using 1/4 × φ
Subclock Enable
This bit enables/disables subclock generation. This
bit should be set to 1 when subclock is not used.
0: Enables subclock generation.
1: Disables subclock generation.
Oscillation Circuit Feedback Resistance Control Bit
Selects whether or not built-in feedback resistance
and duty adjustment circuit of the system clock
generator are used when an external clock is input.
Do not access when the crystal resonator is used.
After setting this bit in the external clock input state,
enter software standby mode, watch mode, or
subactive mode. When software standby mode,
watch mode, or subactive mode is entered, switch
whether or not built-in feedback resistance and duty
adjustment circuit are used.
0: Built-in feedback resistance and duty adjustment
1: Built-in feedback resistance and duty adjustment
Reserved
This bit is readable/writable, but the write value
should always be 0.
circuit of the system clock generator used.
circuit of the system clock generator not used.
Rev. 6.00 Mar. 18, 2010 Page 769 of 982
SUB
) generated by the subclock oscillator
Section 23 Clock Pulse Generator
REJ09B0054-0600