MPC8533EVTAQGA Freescale Semiconductor, MPC8533EVTAQGA Datasheet - Page 172

• Manufacturer Part Number: MPC8533EVTAQGA
• Description: MPU POWERQUICC 783-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC8533EVTAQGA

• Processor Type: MPC85xx PowerQUICC III 32-Bit
• Speed: 1.0GHz
• Voltage: 0.95 V ~ 1.05 V
• Mounting Type: Surface Mount
• Package / Case: 783-BBGA, FCBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

Reset, Clocking, and Initialization
See
on the default boot ROM values. Also, see
for information on translation of the boot page.
4.4.3.5
The host/agent reset configuration inputs, shown in
or as an agent of a master on another interface. In host mode, the MPC8533E is immediately enabled to
master transactions to the PCI interface. If the MPC8533E is an agent on the PCI or PCI Express interfaces,
then the MPC8533E is disabled from mastering transactions on that interface until the external host
enables it to do so. The external host does this by setting the control registers of the MPC8533E’s interfaces
appropriately. See details in the PCI and PCI Express, programming models described in
Bus Interface,”
Note that the values latched on these signals during POR are accessible through the memory-mapped
PORBMSR (POR boot mode status register) described in
Register (PORBMSR).”
4.4.3.6
The MPC8533E can be configured with different I/O ports active.
I/O ports and bit rates (and required reference clocks) that are possible for the PCI Express interfaces.
4-14
Functional Signals
LWE[1:3]/LBS[1:3]
Default (111)
Section 2.1, “Local Memory Map Overview and Example,”
Host/Agent Configuration
I/O Port Selection
MPC8533E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 1
and
Reset Configuration
Chapter 18, “PCI Express Interface Controller,”
cfg_host_agt[0:2]
Name
Table 4-13. Host/Agent Configuration
(Binary)
Value
000
001
010
011
100
101
110
111
Section 4.3.1.3.1, “Boot Page Translation Register (BPTR),”
Reserved
MPC8533E acts as an endpoint on PCI-Express 3 interface. It acts as
the host/root complex for all other PCI/PCI-Express interfaces.
Reserved
MPC8533E acts as an endpoint on PCI-Express 2 interface. It acts as
the host/root complex for all other PCI/PCI-Express interfaces.
Reserved
MPC8533E acts as an endpoint on PCI-Express 1 interface. It acts as
the host/root complex for all other PCI/PCI-Express interfaces.
MPC8533E acts as an agent of an external host on its PCI interface.
It acts as a root complex for all PCI-Express interfaces.
MPC8533E acts as the host processor/root complex on all interfaces
(default).
Table
4-13, configure the MPC8533E to act as a host
Section 19.4.1.2, “POR Boot Mode Status
for an example memory map that relies
Table 4-14
respectively.
Meaning
shows the configuration of
Freescale Semiconductor
Chapter 17, “PCI