EP4SE530H40I3 Altera, EP4SE530H40I3 Datasheet - Page 877

• Manufacturer Part Number: EP4SE530H40I3
• Description: IC STRATIX IV FPGA 530K 1517HBGA
• Manufacturer: Altera
• Series: STRATIX® IV Er

Specifications of EP4SE530H40I3

• Number Of Logic Elements/cells: 531200
• Number Of Labs/clbs: 21248
• Total Ram Bits: 27376
• Number Of I /o: 976
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 1517-HBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -

Chapter 5: Dynamic Reconfiguration in Stratix IV Devices
Dynamic Reconfiguration Modes Implementation
Figure 5–17. Option 1 for Transmitter Core Clocking (Channel and CMU PLL Reconfiguration Mode)
February 2011 Altera Corporation
FPGA Fabric
tx_clkout[0]
Low-speed parallel clock generated by the TX0 local divider (tx_clkout[0])
High-speed serial clock generated by the CMU0 PLL
Figure 5–17
channels of a transceiver block.
■
■
Consider the following scenario:
■
■
■
Option 2 is applicable in this scenario because the design requires all four regular
transceiver channels to be reconfigured to different data rates and functional modes.
Each channel can be reconfigured to a different functional mode using the channel
and CMU PLL reconfiguration mode.
Enable this option if you want the individual transmitter channel tx_clkout
signals to provide the write clock to their respective Transmit Phase Compensation
FIFOs.
This option is typically enabled when each transceiver channel is reconfigured to a
different functional mode using channel reconfiguration.
Four regular transceiver channels configured at 3 Gbps and different functional
modes.
Channel and CMU PLL reconfiguration mode is enabled in the
ALTGX_RECONFIG MegaWizard Plug-In Manager.
You want to reconfigure each of the four regular transceiver channels to different
data rates and different functional modes.
Option 2: Use the Respective Channel Transmitter Core Clocks
shows the sharing of channel 0’s tx_clkout between all four regular
TX0 (3 Gbps/1.5 Gbps)
TX1 (3 Gbps/1.5 Gbps)
TX2 (3 Gbps/1.5 Gbps)
TX3 (3 Gbps/1.5 Gbps)
Transceiver Block
RX3
RX1
RX2
RX0
Stratix IV Device Handbook Volume 2: Transceivers
CMU1 PLL
CMU0 PLL
5–31