HD6417641 RENESAS [Renesas Technology Corp], HD6417641 Datasheet - Page 835

• Manufacturer Part Number: HD6417641
• Manufacturer: RENESAS [Renesas Technology Corp]

20.7.2
When the transmitted data for EP2 is transferred by DMA when the data on one side of FIFO (64
bytes) becomes full an equivalent processing of writing 1 to the USBTRG/PKTE bit is
automatically performed in the module. Therefore, when data to be transferred is a multiple of 64
bytes, writing 1 to the USBTRG/PKTE bit is not necessary.
For the data less than 64 bytes, a 1 should be written to the USBTRG/PKTE bit by a DMA
transfer end interrupt of the DMAC. If a 1 is written to the USBTRG/PKTE bit for transferring the
maximum number of bytes (64 bytes), the correct operation cannot be guaranteed.
For example, if 150 bytes of data are transmitted to the host, the equivalent processing if writing 1
to the USBTRG/PKTE bit is automatically performed internally in the two places in figure 20.16.
This processing is done when the data on the currently selected FIFO becomes full meaning that
the processing is to be automatically performed only when 64 bytes of data are transferred.
When the last 22 bytes are transferred, write 1 to the USBTRG/PKTE bit because this is not
automatically written to. There is no data to be transferred in the application side, but this module
outputs the DMA transfer request for EP2 as long as the FIFO has a space. When all the data is
transferred by DMA, write 0 to the USBDMA/EP2DMAE bit to cancel the DMA transfer request
for EP2.
DMA Transfer for Endpoint 2
64 bytes
(automatically written)
Figure 20.16 EP2 PKTE Operation
PKTE
64 bytes
(automatically written)
PKTE
22 bytes
Generate DMA transfer end interrput
Rev. 4.00 Sep. 14, 2005 Page 785 of 982
PKTE
(automatically written)
Section 20 USB Function Module
REJ09B0023-0400