M3087BFLBGP#U5 Renesas Electronics America, M3087BFLBGP#U5 Datasheet - Page 115

• Manufacturer Part Number: M3087BFLBGP#U5
• Description: IC M32C/87 MCU FLASH 144LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M32C/80r

Specifications of M3087BFLBGP#U5

• Core Processor: M32C/80
• Core Size: 16/32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IEBus, IrDA, SIO, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 121
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 34x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 144-LQFP
• For Use With: R0K330879S001BE - KIT DEV RSK M32C/87R0K330879S000BE - KIT DEV RSK M32C/87
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M32C/87 Group (M32C/87, M32C/87A, M32C/87B)
REJ09B0180-0151 Rev.1.51 Jul 31, 2008
Page 91 of 587
9.1.3
Table 9.2
CM2 Register
9.1.3.1
On-chip oscillator generates the 1-MHz on-chip oscillator clock. The on-chip oscillator clock is used as the
clock source for the CPU clock and peripheral function clocks.
The on-chip oscillator clock is stopped after reset. When the CM21 bit in the CM2 register is set to 1 (on-chip
oscillator clock), the on-chip oscillator starts oscillating and becomes the clock source for the CPU clock and
peripheral function clocks in place of the main clock.
Table 9.2 lists on-chip oscillator start conditions.
When the main clock is terminated running by an external factor, the on-chip oscillator automatically starts
oscillating to provide the clock.
When the CM 20 bit in the CM2 register is set to 1 (oscillation stop detect function used), an oscillation stop
detection interrupt request is generated as soon as the main clock is lost. Simultaneously, the on-chip oscillator
starts oscillating. The on-chip oscillator clock takes the place of the main clock as the clock source for the CPU
clock and peripheral function clocks. Associated bits in the CM2 register are changed as follows:
The oscillation stop detection interrupt shares the vector with the watchdog timer interrupt and the Vdet4
detection interrupt. When these interrupts are used simultaneously, verify the CM22 bit in the interrupt routine
to determine if an oscillation stop detection interrupt request has been generated.
When the main clock resumes its operation after a loss of the main clock is detected, the main clock can be
selected as the clock source for the CPU clock and peripheral function clocks by a program. Figure 9.11 shows
the procedure to switch the clock source from the on-chip oscillator clock to the main clock.
In low-speed mode, when the main clock is lost while the CM20 bit is set to 1, an oscillation stop detection
interrupt request is generated, and the on-chip oscillator starts oscillating. The sub clock remains as the source
for the CPU clock. The on-chip oscillator clock becomes the source for the peripheral function clocks.
When the peripheral function clocks are stopped, the oscillation stop detect function cannot be used. To enter
wait mode while using the oscillation stop detect function, set the CM02 bit in the CM0 register to 0 (peripheral
clocks do not stop in wait mode).
The oscillation stop detect function is a precaution against the unintended termination of the main clock by an
external factor. Set the CM20 bit to 0 (oscillation stop detect function not used) when the main clock is stopped
by a program, i.e., entering stop mode or setting the CM05 bit in the CM0 register to 1 (main clock stops).
When the main clock frequency is 2 MHz or lower, the oscillation stop detect function is not available. In this
case, set the CM20 bit to 0.
CM21
1
0
0
•
•
•
CM21 bit becomes 1 (on-chip oscillator clock becomes the CPU clock)
CM22 bit becomes 1 (loss of main clock stop is detected)
CM23 bit becomes 1 (main clock stops)
On-Chip Oscillator Clock
Oscillation Stop Detect Function
On-Chip Oscillator Start Condition
PM22
0
1
0
PM2 Register
PM27, PM26
00b
00b
10b
Clock source for the CPU clock and peripheral function clock
Count source for the watchdog timer
Clock source for f2n
Applications
9. Clock Generation Circuits