M3087BFLBGP#U5 Renesas Electronics America, M3087BFLBGP#U5 Datasheet - Page 433

• Manufacturer Part Number: M3087BFLBGP#U5
• Description: IC M32C/87 MCU FLASH 144LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M32C/80r

Specifications of M3087BFLBGP#U5

• Core Processor: M32C/80
• Core Size: 16/32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IEBus, IrDA, SIO, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 121
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 34x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 144-LQFP
• For Use With: R0K330879S001BE - KIT DEV RSK M32C/87R0K330879S000BE - KIT DEV RSK M32C/87
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M32C/87 Group (M32C/87, M32C/87A, M32C/87B)
REJ09B0180-0151 Rev.1.51 Jul 31, 2008
Page 409 of 587
Figure 23.5
23.1.3
23.1.3.1
CANi Sleep Control Register (i = 0, 1)
b7 b6 b5 b4
When the SLEEP bit is set to 0, the clock is not supplied to the CAN module and the CAN module enters sleep
mode.
When the SLEEP bit is set to 1, the clock is supplied to the CAN module and the CAN module exits sleep
mode.
NOTE:
NOTE:
1. Perform the initialization for the CAN module after CAN sleep mode is exited.
1. Enter sleep mode after the STATE_RESET bit in the CiSTR register becomes 1 (CAN module is in reset).
While the CAN0 module is in sleep mode, no SFR associated with CAN0 (allocated in addresses 01E0h to 0245h) can be
accessed, except for the C0SLPR register.
While the CAN1 module is in sleep mode, no SFR associated with CAN1 (allocated in addresses 0250h to 02BFh) can be
accessed, except for the C1SLPR register.
CANi Sleep Control Register (CiSLPR Register) (i = 0, 1)
b3
b2
C0SLPR and C1SLPR Registers
SLEEP Bit
b1
b0
Bit Symbol
SLEEP
(b7-b1)
Symbol
C0SLPR
C1SLPR
−
Sleep mode control bit
Unimplemented.
Write 0. Read as undefined value.
Bit Name
Address
0242h
0252h
0: Sleep mode entered
1: Sleep mode exited
Function
(1)
After Reset
XXXX XXX0b
XXXX XXX0b
23. CAN Module
RW
RW
−