M3087BFLBGP#U5 Renesas Electronics America, M3087BFLBGP#U5 Datasheet - Page 431

• Manufacturer Part Number: M3087BFLBGP#U5
• Description: IC M32C/87 MCU FLASH 144LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M32C/80r

Specifications of M3087BFLBGP#U5

• Core Processor: M32C/80
• Core Size: 16/32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IEBus, IrDA, SIO, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 121
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 34x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 144-LQFP
• For Use With: R0K330879S001BE - KIT DEV RSK M32C/87R0K330879S000BE - KIT DEV RSK M32C/87
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M32C/87 Group (M32C/87, M32C/87A, M32C/87B)
REJ09B0180-0151 Rev.1.51 Jul 31, 2008
Page 407 of 587
23.1.1.4
23.1.1.5
23.1.1.6
Bits TSPRE1 and TSPRE0 determine the count source of the time stamp counter.
NOTE:
When the TSRESET bit is set to 1 (count reset), the CiTSR register becomes 0000h. The TSRESET bit is
automatically set back to 0 after the CiTSR register becomes 0000h.
When the ECRESET bit is set to 1, registers CiTEC and CiREC become 00h and the CAN module are forcibly
placed in an error active state.
The ECRESET bit is automatically set back to 0 after the CAN module enters an error active state.
NOTES:
1. Change bits TSPRE1 and TSPRE0 setting while the STATE_RESET bit is 1 (CAN module is in reset).
1. Once entering an error active state, the CAN module is permitted to communicate after 11 consecutive
2. Set the ECRESET bit to 1 while the CAN module is in a bus-off or bus-idle state. Do not set the
recessive bits have been detected on the CAN bus.
ECRESET bit to 1 while the CAN module is transmitting or receiving.
TSPRE1 and TSPRE0 Bits
TSRESET Bit
ECRESET Bit
23. CAN Module